No. 136 f m

history

Victorinox produced the model no. 136 fm from around 1973 until today. Essentially this was an early model Champion without the long nail file but with a chisel on the back. This model was created when an additional layer was added to the model no. 146 fm (Champion) from around 1973 using the magnifying glass and the Phillips screwdriver.

Originally equipped with the fish scaler, this was replaced by tongs in the 1980s.

functional parts

Model No. 136 fm had a small and a large cutting blade, a can opener, screwdriver, scissors, saw, fish scaler, metal file/saw and, on the back, a Phillips screwdriver, a chisel and an awl.

The model no. 136 fm always had the additions key ring and toothpick/tweezers.

material thickness

Big cutting blade: 2.7 mm; small cutting blade: 1.7 mm; Scissors: 2.5mm; Metal saw/file: 1.8 mm; fish scales: 1.4 mm; saw: 1.7 mm; Screwdriver: 2.0mm; Can opener: 2.0 mm; Phillips screwdriver: 2.8mm; Awl: 2.0 mm; Chisel: 1.7mm

construction

model no. 136 fm is a 6-layer pocket knife. The top layer consists of the can opener and the screwdriver as well as the awl on the back, the bottom layer consists of small and large cutting blades and the Phillips screwdriver on the back. In the 4 layers in between are fish scales, saw, metal saw/file with chisel on the back and scissors. All front tools except for the small cutting blade and the screwdriver are fixed with the foot rivet. An awl, chisel and Phillips screwdriver rotate around the center rivet.

scale material

Victorinox used as scale material Cellidor red.

Liners/spacers/rivets

The circuit boards are made of aluminum, the intermediate layer is made of nickel silver

Trade names: Craftsman